A Quick and Easy Guide to Installing Window Decals

Every business needs advertising to succeed, but not all advertising methods are equally effective or affordable.

Window decals, which are essentially large stickers that you can apply to your windows, have become an increasingly popular way to advertise your business because they’re cheap and effective.

Whether you just got started with your business or are looking to spruce up your old window decals.

Here’s a quick and easy guide on how to install window decals effectively. (More…)

Clean Your Windows

The first step is to make sure your windows are clean. Any dirt or debris will make it harder for the decal to adhere properly.

Use a glass cleaner and a lint-free cloth to wipe down the surface. If you can, do this on a sunny day so that the cleaner can evaporate quickly. If not, let the window dry completely before moving on.

Next, place the decal: Now its time to place your window decals. Make sure it positioned in a way that doesn’t interfere with any open windows or blinds.

Install The Application Fluid

1. Start by clean the window. You don’t want any dirt or debris interfering with the decal’s adhesive.
2. Next, measure the decal and cut it to size.
3. Once the decal is the right size, slowly peel off the backing making sure not to touch the adhesive side of the decal.
4. Carefully apply the decal to the window, starting at one corner and working your way across.
5. Use a squeegee or credit card to smooth out any bubbles that may have formed under the decal.
6. Finally, remove any excess fluid with a lint-free cloth or paper towel.

There you go! Your decal should be secure for up to three years. Remember, you can’t put them on most curved surfaces or windows less than four inches wide!

Peel Off Application Film

Window decals are a great way to show off your personality or promote your business.

They’re easy to install, too! Just follow these simple steps and you’ll have your window decals up in no time.

1. Start with clean windows. Make sure they’re free of dust, dirt, and grime before you start applying your decal. This will help the decal adhere better and last longer.
2. Measure the window and cut the decal to size. It’s better to err on the side of too big rather than too small – you can always trim the decal down if it’s too large.
3. Peel off the application film from the decal.

Place Vinyl Decal on Window

1. Start with a clean window. Decals will not stick to dirty surfaces, so be sure to clean your window with soap and water before you begin.
2. Cut around the decal using a sharp knife or scissors.
3. Peel off the backing paper from the decal.
4. Place the decal on the window, making sure it is positioned correctly.
5. Use a squeegee or credit card to smooth out any bubbles in the decal.
6. Trim off any excess vinyl around the edges of the decal.
7. Enjoy your new window decals!

Rub It in Place

Window decals are a great way to show off your business logo or promote a special sale.

They’re also relatively easy to install. Just follow these simple steps and you’ll have your window decals up in no time.

1. Start with clean windows. Make sure they’re free of dust, dirt, and grime before you begin. This will help the decal adhere better and last longer.
2. Measure the window (or area where you want the decal placed). This will give you an idea of how big or small the decal should be.
3. Cut out the decal (if it’s not already pre-cut). You can use scissors or a utility knife for this step. Just make sure the edges are nice and straight.

Remove Application Fluid

First, remove any application fluid from the window decal by gently scraping it off with a razor blade.

Next, use a household cleaner to clean the area where the decal will be applied. Once the area is clean, apply the decal to the window.

To remove air bubbles, use a credit card or other hard object to smooth out the decal. Finally, trim any excess material from the edges of the decal.

Smile

Window decals are a great way to show off your personality and make your car more unique. But how do you install them?

It’s actually pretty simple! Just follow these steps and you’ll have your window decals up in no time.

1. Clean the area where you want to apply the decal with alcohol or soapy water. This will help the decal adhere better.
2. Cut out the decal, if necessary.
3. Peel off the backing of the decal.
4. Apply the decal to the window, starting at one corner and working your way down.
5. Use a credit card or other flat object to smooth out any bubbles that may have formed under the decal.