If you are very troubled by the router’s wave signals and some are not working then you need to buy such a network device. A device that provides stable network signals to your device and enhances the network connectivity of your router device.
So for this, you can install Belkin N300 WiFi Range Extender. Because the network connectivity of this device is more strong and absolutely enhances the router’s weak signals. With this device, you can easily improve the weak network signals connectivity.
If you are wondering how to increase the weak signals of your router, then for this you have to make a connection. This range extender device is widely compatible with the 802.11 a/B/g/n/AC wireless networks. But this extender comes along with N networks.
The B300 WiFi extender provides more wireless coverage. You can easily access the network connectivity in your whole home. With the network connectivity of this device, you can enjoy streaming 4K videos or gaming consoles.
On the right-hand panel, the WPS button is available. Just press this button and completely perform the belkin N300 setup. This is a wireless setup and no need for any type of wire. This setup is very simple & faster than the wired setup.
Read Also: How do I setup my Belkin Wifi Range Extender
Why is there no light in the Belkin N300 WiFi Range Extender?
The wireless range extender device provides high-speed network connectivity. The LEDs light is built-in on the front panel of the extender. This light provides the status of the extender. If the LEDs are green that means your extender is in working condition.
But if the LEDs light is orange or red that means the issue is there. But sometimes, no light is lit up in this range extender device. If there is no light in the extender device then you can’t access the network connectivity. There are many reasons due to no light in the extender device, which are as follow:
- Faulty power cord
- Power cord loose
- Electric supply not working
- Power connector issue
Some solution to resolve no light in Belkin N300 WiFi Range Extender
If the range extender device has no light then you can check the issue. First, you should solve these issues manually. To manually resolve the issue, you can follow some steps. In the given below, there are some steps. You can follow these steps and easily fix the issue.
Read Also: How might you want to setup your Netgear AC750 Wifi Range Extender?
Using Another Power Cord
Many times the power cord you are using is useless due to which it is not able to give power to the extender device. If your device is not able to get the power cord then the LED light of your device will be on and you will not be able to enjoy network connectivity. To fix this issue, you should verify the power cord is plug into your extender device.
If the power cord is really faulty and broken then you have to remove it immediately. You have to use a new power cord and verify that this cord is in working condition. Now you have to plug this cable into the power connector port of your WiFi system, this port is on the backside of your extender device. After that, the light is lit up on your extender and the issue will be fix.
Read Also: Instantly Review the settings of The Nexxt WiFi Range Extender
Tightly Plug the Power Cord
If there is no light in your range extender device then you need to verify the power cord. Because many times it happens that the power cord which you have kept plugged in is loose. To fix the issue, you have to look at the backside of the range extender device if the power cord is really loose.
So you have to unplug this cable out of the power connector port. Then, you can again be connecting the power cord into the power connector port in the proper manner. Then, the light is lit up on the N300 range extender.
Read Also: How To Improve Brostrend Wireless Range Extender WiFi Performance?
Restart the Range Extender Device
To resolve the no light issue in a quick manner then you can easily restart the device. To restart the extender, you will need to turn off the power to your extender and unplug it from the power supply.
After that, all the power cords that are attach to your device will have to be remove. You have to leave your device like this for some time. After 10-minutes, you can plug all the wires into the Wifi extender device. Then, plug into the power supply. You can turn ON the power and verify the LED light status. Then the LEDs light is lit up and your device works well. After lit up the light, you can easily perform the setup by using the belkin range. After that, the network signals are absolutely enhanced.
Verify The Power Outlet or Supply
If your power cord is in perfect working condition and you have plugged it into the glazing but no light issue still comes out then it means a power supply issue.
To fix the issue, you should check the power supply as many times it does not radiate power which results in no light in your extender. If the power supply does not receive the power, then you can unplug the extender device from this power supply. Then you can plug the extender into the power to receive the power supply.
Read more – Synology RT2600ac Router
