Business & Services Computers and Technology

Amped wireless setup using http://setup.ampedwireless.com

Easily setup Amped via the web address

961 5 minutes read

Login via setup.ampedwireless.com into an Amped router

Amped wireless extenders are among the most preferred networking devices in the market. Using the web-based setup wizard that can be accessed through the http://setup.ampedwireless.com URL, you can configure the network settings in no time. If you recently bought the latest Amped wireless extender, and are trying to figure out how to set up the network settings, this blog will walk you through the steps to get things up and running in no time.

Table of Contents

Default settings for your Amped wireless extender

To access the Amped wireless setup wizard, you’ll need access to the default device credentials, which include:

URL: http://setup.ampedwireless.com

IP address: 192.168.1.1 or 192.168.3.1

Admin Username: admin

Default Password: admin

Main router network SSID and password

Once you have access to the settings mentioned, you can proceed with preparing your devices for the setup and configuration part.

Preparing your Amped wireless for setup

Extenders work by receiving the wireless signals and transmitting them further to greater distances by means of amplifying. You will therefore need to plug your extender where it can receive a sufficient amount of signals(at least 70%) of the main router.

You can take help from your smartphone to check the signal strength at the location you’re looking to install your extender in. It’s an important aspect to ensure seamless internet coverage at all times. Once you have decided on the location you wish to install your Amped wireless device in, you can proceed with the following steps:

Unpack your Amped wireless extender and attach the antennas to the device. Attach the power cords and plug them into the power outlet. Try to place the outlet in the same room as the main router device.
The power supply should be turned on and then wait for the power light on the extender to go into solid. Also, check if the router and the MODEM device at your home are powered on and functioning well.
Once you find everything’s in order, connect your computer/wireless device to the Amped wireless extender’s local network. You can either use a wired connection between devices or connect them wirelessly.
For a wired connection, use an ethernet cable b/w extender and computer. Whereas, you can connect to the extender’s local network manually using the WiFi network. Enable WiFi on your device and then select the extender’s SSID from the list of the networks visible on the screen.

Once your computer/wireless device is connected to the extender’s network, you can proceed with the login process.

Amped Wireless Login Process

launch a compatible web browser on a wireless device connected to the router’s network and type the default URL http://setup.ampedwireless.com in the address bar.
If the web address fails to provide desired results, use the IP address 192.168.1.1 or 192.168.3.1 to access the login page. Press Enter and you’ll be redirected to Amped wireless login wizard.
On the login page, type in the default values corresponding to the username and password.

Default Username: admin

Default Password: admin

Once you have entered these details into their respective fields, click/ tap on the Login button. The login wizard will check the information entered and will guide you further to the setup wizard.

Note: If the said credentials don’t work, you can use the ones mentioned on the product label of your Amped wireless extender. Or, the user guide that comes along with the package can also turn out to be helpful.

Network Settings through the http://setup.ampedwireless.com wizard

On the Amped wireless setup wizard, you’ll notice different options visible on the screen. You can proceed with the internet settings part to facilitate internet access easily. Here are the steps you can follow:

Select the Internet tab from the settings wizard.
The Internet settings screen will appear. Here, select “New Connection” from the menu. Start following the on-screen instructions to proceed with the basic extender network settings.
All the available networks will be scanned in and around your location by the Amped wireless setup wizard from the available list on the screen. Choose the SSID of the main router and click the Join button.
A prompt to type in the password for the main router network will appear on the screen. Once you input the values simply click on the Connect button.
Once connected to the main router’s network, the extender will scan for your internet connection. If you’re using a DSL connection, you’ll need to type in the SSID and Password in the said fields and proceed accordingly.
Next will ask you to configure extended n/w settings. You can set an SSID based on your choice and a password to protect the same. If you’re using a dual-band network, change the SSID and password values for the 5GHz network band as well.
Select the network encryption type as WPA2-PSK and click on the Next button.

The final window of the Amped wireless setup wizard will display a summary of the network settings you have configured. Review them and finally click on the Save button.

Amped wireless setup using WPS

Apart from the web-based setup method using the http://setup.ampedwireless.com URL, you can access the wireless settings using the WPS method.

WPS expands to WiFi Protected Setup and engages a secure passage for the device to connect to the internet. Here are steps you can follow to configure your Amped range extender settings using the WPS option:

- Power on the Amped wireless extender by plugging it into an electrical outlet. Wait until the extender boots up and the device gets ready.
- Search the WPS button on your wireless router and the Amped extender device. It’s mostly present on the rear panel of the device.
- Press the WPS button gently present on the range extender. The WPS LED will light up and begin to blink gradually. The extender will automatically search for a host device to connect to. It will search for about 60 seconds after which you’ll need to press the WPS button again.
- Hit the WPS button present on the router device as well. The WPS status LED of the router blink and eventually turn solid. This signifies that the devices have now synced and are ready to communicate signals among each other.
- The SSID of the extender network will have the suffix “_EXT” so you can differentiate the same easily.

Once the network is set up, you can proceed with connecting your Amped wireless devices to the new network easily.

Connect with the team for help on http://setup.ampedwireless.com issues

While you are trying to access amped wireless setup page online, you might come across problems preventing you from accessing the same easily.

If you encounter any queries and issues, take help from the troubleshooting guide available on the website. Want more help on this topic? Reach out to the team in the end and get your queries resolved at the earliest.

Summary:

Your Amped Wireless device can help you accomplish bandwidth-intensive tasks easily. However, realizing this goal will require you to set things up in an orderly fashion. Knowing how to access the login wizard and proceed with the network settings part is important to set up the internet connection.

Reference: https://dailywold.com